ラベル ccnp の投稿を表示しています。 すべての投稿を表示
ラベル ccnp の投稿を表示しています。 すべての投稿を表示

土曜日, 9月 11, 2010

Bowler Cisco RS CBT GNS based Videos 13 GB

Enhanced Interior Gateway Routing Protocol (EIGRP)


*Configure/Explain EIGRP and use show/debug commands for verification

*EIGRP Basics

*EIGRP Network command

*EIGRP MD5 Authentication

*Explain how EIGRP calculates the composite metric

*EIGRP Summarization

*EIGRP Leak-maps

*EIGRP default route

*Virtual Template Interfaces



Border Gateway Protocol (BGP)

*Configure/Explain BGP concepts listed below and use show/debug commands for verification

*BGP MD5 Authentication



*BGP TTL Security



*BGP Outbound Route Filtering (ORF) between 2 routers



*Configure/Explain BGP and use show/debug commands for verification

*External BGP (EBGP)

*Internal BGP (IBGP)

*BGP Authentication

*BGP Route Reflector's

*BGP AS_Path attribute

*BGP Local Preference attribute

*BGP Default Route

*BGP Route Aggregation

*BGP Route Dampening

*BGP Suppress-Maps

*BGP Unsuppress-Maps

*EBGP Multihop

*BGP Update Source Loopback

*BGP Weight Attribute

*BGP Multi-Exit Discriminator (MED) Attribute

*BGP Community Attribute

*BGP Confederations

*IP Prefix-Lists for BGP



Frame Relay



*Configure/Explain Frame Relay concepts listed below and use show/debug commands for verification



*Frame Relay End to End Keepalives (EEK)



*Point to Point Protocol (PPP) Multilink over Frame Relay



*Explain and show how to setup Virtual Template interfaces and how they are used with PPP over Frame Relay.



*Frame Relay Static configuration

*Frame Relay Point to Point configuration

*Frame Relay point-to-multipoint configuration

*Frame Relay switch in GNS3



IPv6



*Configure/Explain IPv6 concepts listed below and use show/debug commands for verification



*Setting up Frame Relay Static maps using IPv6



*Routing Information Protocol Next Generation (RIPng)



*Configure RIPng on 3 routers on an Ethernet network and explain how RIPng works in comparison to RIPv2



*Enhanced Interior Gateway Protocol (EIGRP) IPv6



*Configure EIGRP IPv6 on 3 different routers in an Ethernet network and show the differences between EIGRP IPv6 and EIGRP IPv4



*Open Shortest Path First Version 3 (OSPFv3)



*Configure OSPFv3 on 3 different routers over frame relay



*Explain how OSPFv3 is different than OSPF IPv4



*Explain the link-local IPv6 addresses and how they are used to provide reachability over frame relay networks using IPv6 dynamic routing protocols



*Border Gateway Protocol for IPv6, Mulitprotocol BGP (MBGP)



*Configure BGP IPv6 between 2 different routers and explain how BGP IPv6 works in comparison to BGP IPv4



*Configure IPV6 on Fast Ethernet and Loopback Interfaces

*Configure IPV6 Static Routing

*IPV6 address auto-configuration



Routing Information Protocol (RIPv2)



*Configure/Explain RIPv2 concepts listed below and use show/debug commands for verification



*Setup RIPv2 Offset Lists and explain how they are used to manipulate RIPv2 metrics and their filtering capabilities



*Setup RIPv2 Summarization



*RIPV2 on 6 routers

*RIPV2 plain text and md5 authentication

*Detailed look at rip hop count metric



Open Shortest Path First (OSPF)



* Configure/Explain OSPF concepts listed below and use show/debug commands for verification



* OSPF over Frame Relay using the network types of Non-Broadcast and Broadcast.



* Explain the different characteristics of Non-Broadcast and Broadcast network types in OSPF and how to configure and verify them.



* How to optimize your OSPF over Frame Relay using Broadcast and Non-Broadcast network types



* Configure All OSPF Area types including, Stub Area, Totally-Stub Area, Not So Stubby Area (NSSA) and Totally NSSA.



* Explain all the different OSPF area types and how they are used to filter Link State Advertisements on within different OSPF Areas



* Configure Redistribution of RIPv2 routes into the OSPF domain



* OSPF Basics

* OSPF in Five different Areas

* OSPF simple and MD5 authentication

* OSPF Summarization (Internal)

* Explain the basics of OSPF

* OSPF Virtual links

* OSPF Virtual link alternative (GRE Tunnel)



Switching Labs



*802.1Q Tunnelling



*Configure/Explain how to setup an 802.1q Tunnel and show the characteristics of a L2VPN.



* Show how you can use an 802.1q Tunnel to create a Layer 2 VPN to tunnel CDP information between to Switches that are not directly connected.



*Switchport Security



*Configure/Explain how to use Switchport Security and show the characteristics of Switchport Security



*Explain how Switchport Security can be used to secure your switches from outside attacks.



*Explain the 3 different modes of Switchport security and also show you advanced Switchport security features to help ease the administration of switchports.



*Configure/Explain Etherchannels and use show commands for verification

*Configure a layer 2 Etherchannel

*Configure a layer 3 Etherchannel

*How to verify Etherchannel connectivity

*Dynamic Trunking Protocol (DTP)

*Configure/Explain DTP and use show commands for verification

*Vlan Trunking Protocol (VTP)

*Configure/Explain VTP and use show commands for verification

*Explain the different modes of VTP

*VTP Authentication

*VTP Pruning

*Vlan Trunking from a Switch to a Router

*Configure/Explain "router-on-a-stick" and use show commands for verification

*Configure/Explain VLAN's and use show commands for verification



IP Multicast



* Configure/Explain Multicast concepts listed below and use show/debug commands for verification



* Auto RP between 4 routers



* Explain the concept of a mapping agent within AutoRP.



* Explain how to announce multicast groups on a RP into the Auto RP domain and how the Mapping Agent will discover, advertise and Map to the groups to the specific RP’s.



*Configure IP Protocol Independent Multicast Dense Mode (PIM-DM)

*Configure IP Protocol Independent Multicast Sparse Mode (PIM-SM)



Access Control Lists



* Configure/Explain the Zone Based Firewall concepts listed below and use show/debug commands for verification



* Setup a Zone Based Firewall (ZBF) and show how they work with the MQC configuration set.



* Explain in detail how filtering takes place within ZBF’s



* Explain the different Zone types



* Explain the concept of a Zone Pair



* Explain how you apply the policy map to the Zone pairs



* Explain how to put interfaces into different Zones



* Standard Access Control List (ACL)

* Virtual Terminal Line (VTY) Filtering

* Time Based Access Control List (TBACL)

* Explain/Verify how TBACLs work

* IP route-cache flow to monitor network traffic on the router



Quality of Service (QoS)



* Configure/Explain the QoS concepts listed below and use show/debug commands for verification



* Explain in detail how to setup and use the Modular Quality of Service Command Line Interface (MQC) configuration set



* Show how to use Class-maps, Policy-maps and apply the policy map inbound/outbound on an interface.



* IP Network Based Application Recognition (NBAR)



* Explain in detail how to implement NBAR and how it can be used proactively to discover Applications and Protocols that are running on or through a specific interface



* Explain Packet Description Language Module (PDLM) and how it can be used in NBAR



* Explain in detail the “Match Protocol” Class map statement and how it is related to NBAR



* Legacy Frame Relay Traffic Shaping (FRTS)



* Explain in detail how to setup and use Legacy FRTS on 3 different routers using the concept of a map-class to apply under the specific Data Link Connection Identifiers (DLCI’s)



* Explore some of the main features of Legacy FRTS and explain them such as map-class, CIR, Bc, Be, Tc, BECN, Adaptive shaping, MINCIR.



Point to Point Protocol (PPP)



*Configure/Explain PPP Multilink on 2 routers across multiple Serial point-to-point connections.



*Explain the concept of bundling multiple interfaces together to form one logical interface.



*PPP Authentication over Point to Point Serial Link

*PPP CHAP Authentication

*PPP PAP Authentication



Multi Protocol Label Switching (MPLS)

*Configure/Explain MPLS and use show/debug commands for verification

*MPLS Unicast IP Forwarding



MPLS VPN's

*Configure/Explain MPLS VPN's and use show/debug commands for verification

*Virtual Routing and Forwarding (VRF)

*Multi-Protocol BGP (VPNV4)

*Mutual Redistribution between PE and CE nodes running RIPv2

*Explain BGP AS-Path Attribute in MPLS VPN

*BGP allow-as in

*BGP as-override



On-Demand Routing (ODR)

*Configure/Explain ODR and use show/debug commands for verification

*Explain Cisco Discovery Protocol (CDP) and its use with ODR



Floating Static Route

*Configure/Explain floating static route and use show/debug commands for verification



IP Services

*Configure/Explain Dynamic Host Configuration Protocol (DHCP) on a router and use show/debug commands for verification

*Microsoft loopback adapter on your computer to act as a DHCP Client for the DHCP Server in GNS3

*Configure/Explain Network Time Protocol (NTP) on a router and use show/debug commands for verification

*Basic NTP for both Broadcast and Non-broadcast Networks



Policy Based Routing (PBR)

*Configure/Explain PBR and use show/debug commands for verification

*Policy Based Routing using a Route-map



Generic Routing Encapsulation (GRE)

*Configure/Explain GRE Tunnel and use show/debug commands for verification

*GRE Tunnel

*EIGRP Across GRE Tunnel

*Explain GRE Tunnel Basics



Hot Standy Router Protocol (HSRP)

*Configure/Explain HSRP and use show/debug commands for verification

*HSRP Preemption

*HSRP traffic flow



Connecting Real Switches to GNS3/Dynamips

*Connect a real 3550 to GNS3

*Verify connectivity between the router in GNS3 and the Real 3550

*Give you specifications on my GNS3/Dynamips Server



Redistribution

*Perform Mutual Redistribution between RIPv2 and OSPF

*Use a route-map to tag routes

*Explain RIP and OSPF Metrics

*Verify that redistribution is being performed properly using show commands



GNS3

*Configure/Explain how to use GNS3 and set it up to use.



Security Device Manager (SDM)

*Configure/Explain how to use SDM with GNS3

 
DVD1: http://fileserve.com/list/cX8AGKT


DVD2: http://fileserve.com/list/rJGSHNs

DVD3: http://fileserve.com/list/FwgSAUx

DVD4: http://fileserve.com/list/PQzfrwk

火曜日, 9月 07, 2010

2010年 最新版 CCNP 4.0 Student Guide

Implementing_Cisco_IP_Routing_(ROUTE)_Foundation_Learning_Guide
Implementing_Cisco_IP_Switched_Networks_(SWITCH)_Foundation_Learning_Guide
Troubleshooting_and_Maintaining_Cisco_IP_Networks_(TSHOOT)_Foundation_Learning_Guide
CCNP_troubleshooting_642-832_Student_Guide_Vol.1
CCNP_troubleshooting_642-832_Student_Guide_Vol.2

download link
http://www.4shared.com/dir/YL3TxAlL/2010_CCNP_Book.html

木曜日, 4月 01, 2010

Cisco Ccnp Passguide Latest Dumps Pdf 642-901, 642-812, 642-845, 642-825

megaupload




642-901 : http://linkbee.com/FJBBN



642-812 : http://linkbee.com/FJBAB



642-825 : http://linkbee.com/FJA97



642-845 : http://linkbee.com/FJA99





ziddu





642-901 : http://linkbee.com/FJBBO



642-812 : http://linkbee.com/FJBBR



642-825 : http://linkbee.com/FJBBQ



642-845 : http://linkbee.com/FJBBP

 
 
 
 

金曜日, 3月 19, 2010

Cisco CCNP SWITCH 642 813 Cert Kit iso | 2.4 GB


















CCNP SWITCH 642 813 Cert Kit is a best of breed late stage preparation package that combines three self study tools into one value priced package. This product provides you with over 6 hours of personal instruction from Sr. instructor Dave Hucaby on the LAN Switching Video Mentor, a concise review of CCNP SWITCH exam topics in the CCNP SWITCH Quick Reference, and 300 exam review questions in both desktop and mobile formats in the CCNP SWITCH Cert Flash Cards Online. LAN Switching Video Mentor is a DVD video product.




The DVD contains a series of short instructional videos that demonstrate how to accomplish some of the most common configuration and troubleshooting tasks on the Catalyst platforms and how to verify that the network is working correctly. The DVD contains 20 individual videos for a total of about six hours of instruction. CCNP SWITCH Quick Reference provides you with detailed, graphical based information, highlighting only the key topics on the CCNP SWITCH exam in cram style format. This fact filled Quick Reference allows you to get all important information at a glance, helping focus on areas of weakness and enhance memory retention of important concepts. CCNP SWITCH Cert Flash Cards Online provides a concise review of all objectives on the CCNP SWITCH 642 813 exam. This online exam preparation tool consists of a custom flash card application loaded with over 300 total questions that test your skills and enhance retention of exam topics.



# Combines three effective self study tools into one value priced package

# The Switching Video Mentor contains 20 individual videos for six hours of instruction

# The Cert Flash Cards Online provide 300 online flash cards for mobile and desktop devices

# The CCNP SWITCH Quick Reference provides late stage review in print and PC formats

http://hotfile.com/dl/29894469/d7d8873/Cisco_CCNP_Switch.part01.rar.html


http://hotfile.com/dl/29894511/e8c3cbd/Cisco_CCNP_Switch.part02.rar.html

http://hotfile.com/dl/29894611/ee99927/Cisco_CCNP_Switch.part03.rar.html

http://hotfile.com/dl/29894645/8f79bbb/Cisco_CCNP_Switch.part04.rar.html

http://hotfile.com/dl/29894715/f8eba9e/Cisco_CCNP_Switch.part05.rar.html

http://hotfile.com/dl/29894769/a97e3a7/Cisco_CCNP_Switch.part06.rar.html

http://hotfile.com/dl/29894891/15f220f/Cisco_CCNP_Switch.part07.rar.html

http://hotfile.com/dl/29894972/de8fbc2/Cisco_CCNP_Switch.part08.rar.html

http://hotfile.com/dl/29895073/9c8d8f6/Cisco_CCNP_Switch.part09.rar.html

http://hotfile.com/dl/29895149/f6c1926/Cisco_CCNP_Switch.part10.rar.html

http://hotfile.com/dl/29895276/a3dfe18/Cisco_CCNP_Switch.part11.rar.html

http://hotfile.com/dl/29895391/9fc94b5/Cisco_CCNP_Switch.part12.rar.html

http://hotfile.com/dl/29895461/f7fe47e/Cisco_CCNP_Switch.part13.rar.html

http://hotfile.com/dl/29895552/be16e58/Cisco_CCNP_Switch.part14.rar.html

http://hotfile.com/dl/29895618/7a97a1f/Cisco_CCNP_Switch.part15.rar.html

http://hotfile.com/dl/29895718/672c5c2/Cisco_CCNP_Switch.part16.rar.html

http://hotfile.com/dl/29895781/b89707e/Cisco_CCNP_Switch.part17.rar.html

http://hotfile.com/dl/29895864/27b3cf8/Cisco_CCNP_Switch.part18.rar.html

http://hotfile.com/dl/29895916/0193477/Cisco_CCNP_Switch.part19.rar.html

http://hotfile.com/dl/29895996/ca2ad2b/Cisco_CCNP_Switch.part20.rar.html

http://hotfile.com/dl/29896060/bdc57cc/Cisco_CCNP_Switch.part21.rar.html

http://hotfile.com/dl/29896136/175246b/Cisco_CCNP_Switch.part22.rar.html

http://hotfile.com/dl/29896194/250af4b/Cisco_CCNP_Switch.part23.rar.html

http://hotfile.com/dl/29896258/106026a/Cisco_CCNP_Switch.part24.rar.html

http://hotfile.com/dl/29896329/a2c87d5/Cisco_CCNP_Switch.part25.rar.html
 

火曜日, 3月 16, 2010

Boson NetSim 7.06 を使って、CCNA 、CCNPのラッポしましょう

偶然海外のサイトにBoson NetSim 7.06 の紹介を見た、
原文のままここで貼り付けます。

The Boson NetSim for CCNA & CCNP is the most powerful and versatile Cisco network simulation software available for IT professionals seeking CCNA & CCNP certifications.


NetSim's Virtual Packet Technology sets it apart because it actually emulates the functions of a real network - a real network that you can design yourself.

The Boson NetSim simulates both switching bridge tables and routing protocol tables to allow you to go OUTSIDE the labs. The Boson NetSim makes it possible to design and configure network with 40 different router models and three different Catalyst models to choose from.

1. Install the file " ccnp_netsim7.exe ", (Vista and 7 users should right click setup file and select Run As Administrator) REMEMBER AFTER INSTALLATION DONT RUN THE SOFTWARE "

2. Now go to Folder option in Windows , Click View and Tick Show Hidden files and folders.

3. Copy " mscon43demo.dll " to

c:\Documents and Settings\All Users\Application Data\Boson Software\Boson NetSim for CCNP 7.0 (Windows XP)

For Vista & 7 Users, Copy "mscon43demo.dll" to C:\Program Data\Boson Software\Boson NetSim for CCNP 7.0

4. Run the software , select Demo version and let the labs load ,after labs are loaded ,exit the Program.

5. Then Extract all files in the ExtractME.RAR to
c:\Documents and Settings\All Users\Application Data\Boson Software\Boson NetSim for CCNP 7.0 (Windows XP)

For Vista & 7 Users, extract files to C:\Program Data\Boson Software\Boson NetSim for CCNP 7.0

Overwrite all the files.

Start The Program again ,select the demo version , let the labs be loaded ,

Now you will get all commands and labs just like a full version.

入手場所はこちらです。
http://rapidshare.com/files/347694238/BOSO706.rar
 
 

月曜日, 3月 15, 2010

6 In 1 Ccnp 2010 Guides And References Route Switch Tshoot

2010年4月からCCNP新制度になりますが、CCNP新教科書はここに全部まとめました。

http://rapidshare.com/files/362240573/CCNP_2010_Guides_and_References_AIO_Route_SWITCH_TSHOOT.rar

CCNP ROUTE 642-902 Official Certification Guide

CCNP ROUTE 642-902 Quick Reference

CCNP SWITCH 642-813 Quick Reference

CCNP SWITCH 642-813 Official Certification Guide

CCNP TSHOOT 642-832 Official Certification Guide

CCNP TSHOOT 642-832 Quick Reference

土曜日, 1月 09, 2010

Passguideの最新問題集を見つけた

CCNA:
Quote:
passGuide 640-802 V3.27
PDF version:
1 or 2

CCNA Voice:
640-460
pdf version:
1 or 2
 
CCNP
642-825:
1 
 
642-845:
1 
 
642-812:
1 or 2
 
642-901:
1 or 2
 
642-892:
1
 
350-001 V3.22 166Q&A

PDF Version: http://rapidshare.com/files/326405013/PassGuide_350-001_V3.22.pdf.html

ccnp 新参考資料 第5版

0642-901 BSCI:
642-812 BCMSN:
642-825 ISCW:
642-845 ONT:
part1 part2 part3 part4